Tote and carton storage

GEBHARDT load handling devices (LHD) is the partner to the torage and retieval crane. Rapid and assured access - also to multiple depth shelf compartments - when depositing and removing containers or boxes ensures an optimum process sequence. With six different standard LHD for containers and boxes, it is possible to equip AS/RS according to the task at hand. Variations arise due to requirements pertaining to conveyance goods, load handling devices and shelf depths. Alongside the mechanical qualities, spatial requirements, speed and process accuracy are decisive advantages of the GEBHARDT load handling devices.

 Grip technology         

 

•  High process assurance through form fit
•  No excavation in a vertical direction necessary
•  High throughput
•  Space-saving through reduced free space between containers and
   next shelf compartment
•  Storing and withdrawing can take place almost simultaneously in the
   reception area through belt drives or motor rollers
•  Clamp movement in 0.4 seconds
•  Loading equipment height from 0.12 m

Telescope

 

•  Extremely high weights possible
•  Multi-depth storage
•  Various containers (also different sizes)
•  Storing and withdrawing can take place almost simultaneously in the
   reception area through belt drives
•  Relocations can be sped up using belt drives with multiple container positions
•  Angle adjustment of up to 10°

Telescope with belts

 

•  Double depth storage possible
•  Short depositing and output times
•  Storing and withdrawing can take place almost simultaneously in the
   reception area through the use of belt drives
•  Angle adjustment of up to 10°

 

Extractor

 

•  High storage density
•  No lifting of the trays in the storage compartment necessary
•  Form fit extraction of the trays - meaning high degree of process assurance
•  Throughput higher than with excavation technology due to fewer drive cycles
•  Lowest lifting equipment height lies at 0.34 m

Multiform-gripper passive

 

•  Different LE lengths, widths and heights possible
•  Shelving can be used
•  Multi-depth storage possible
•  No vertical excavation - space-saving in the y-direction
•  Storing and withdrawing can take place almost simultaneously in the 
   reception area through belt drives (or similar)
•  Clamp movement dependent on the width of the lifting equipment
•  Lengths and widths can vary 

Multiform-gripper active  

 

•  Different LE lengths, widths and heights possible
•  Shelving can be used
•  Multi-depth storage possible
•  No vertical excavation - space-saving in the y-direction
•  Storing and withdrawing can take place almost simultaneously in the
   reception area through belt drives (or similar)
•  Clamp movement dependent on the width of the lifting equipment
•  Lengths and widths can vary

_______________________________________________________________________________________________

 
Grip technology
Telescope
Telescope with belts
Extractor
MFG passive
MFG active 
max. payload kg
 50  1000  2x50  300  2x50 2x50
max. speed m/s
 1,25  2,0  2,0  1,0  2,0 2,0
max. accelaration m/s²
 2,0  2,0  2,0  2,0  2,0 2,0
max. accelaration m/s² under load
1,5 1,5  1,5 1,5   1,5  1,5
Loading equipment
 B, T  B, T, P, K  B, T  B, T  B, T, K B, T, K
Aisle width from m
0, 95 0,80  0,95  0,95  0,95 0,95


C = Container, T = Tray, P = Pallet, B = Box